Recently Reviewed Custom Manufacturing Suppliers on SupplierSource

paul grauber had a neutral experience with C.A.Spalding Co.:

Ca Spalding has been the recent subject of a recently released book. Titled At What Cost? A Whistleblower Story.http://www.trafford.com/Bookstore/BookDetail.aspx?BookId=SKU-000144565

Posted 5 days ago

Danny Taylor had a positive experience with Haughton Design Limited:

"Haughton Design carried out a comprehensive 2D to 3D modelling service, within a very tight timeframe, and to an excellent standard"

Posted about 1 month ago

Joe LaCour had a positive experience with Next Intent:

KineOptics selected Next Intent to supply the machined parts for the HEPI Actuators we supplied to the LIGO project. The team at Next Intent were great to work with and the 6 tons of parts we purchased were spot on and what few problems we had were quickly resolved. We are looking forward to working with them in the future. San Luis Obispo is a great place to visit too!

Posted about 1 month ago

Victor Zepeda had a positive experience with Next Intent:

The only way to describe the group from Next Intent, is as follows: Supportive; Responsive; Knowledgeable; Affable & Patient. It is always a pleasure working with NI. They make the process of product realization that much easier. Thanks, Swiss Wire EDM

Posted 2 months ago

Conor Johnson had a positive experience with Next Intent:

Next Intent does superior work for CSA. CSA sneds a large part of its machining requirements to Next Intent and we can always count on it being done correctly.

Posted 2 months ago

Calvin Waters had a positive experience with CubicArt Design Inc.:

Very proffessional design firm to work with. Very fast and accurate designs. Great group of people to work with. Have worked with on numerous projects and will continue to do so in future. Very competitive pricng as well.

Posted 3 months ago

Ronnie Denburg had a positive experience with Genesis TEK, LLC:

It's hard for me to have imagined what an enjoyable and easy experience it was working with Larry. In every way, except my high standard for quality work, my expectations were exceeded. I was most impressed by the quick turn around - not only of the initial work, but subsequent alterations - often in just a couple of hours! And Larry was a pleasure to deal with. Both via email and phone his communications were clear and precise. Finally, Larry went out of his way to send me to a rapid prototype competitor and got me a quote from them, because their material better suited my needs. I couldn't have asked for anything more. ****** (6 out of 5 stars)

Posted 3 months ago

Natalie Levi had a positive experience with Genesis TEK, LLC:

They say a business is only as successful as the people it partners with. Having GenesisTek as our design resource has ensured us quality, efficiency, and cost effectiveness when it comes to the design phase of our product development division. Larry and Tim make a fantastic team by crossing all their "t's" which means we did not have to micromanage the process. In fact, they produced the designs and prototypes so efficiently, we were put ahead of schedule. I would recommend GenesisTek to anyone seeking out design work. In the end, you realize you get more than just design...you also get prototyping convenience, production sourcing options, service, and expertise. Its always great to get more than you expected.

Posted 3 months ago

Anonymous Contractor had a positive experience with Genesis TEK, LLC:

Tim Bottger and Larry Gonier at Genesis Tek did an incredible job: quickly, inexpensively and of the highest quality, with our government project. Tim's CAD drawings on SolidWorks and other platforms enabled us to solicit competitive bids with different injection molding companies. Larry's quick prototype (via Solid Designs) enabled us to visualize and make last minute changes before final CAD and tool contracting. Tim is also a fine gentleman and dedicated, consumate professional. Both are sincere patriots. I would not hesitate to recommend Genesis Tek for rapid prototyping design and intend to use them again for the next generation of our system. It was a great pleasure to work with both of them.

Posted 4 months ago

Michael Bischoff had a positive experience with Haughton Design Limited:

Haughton Design have been working with us on our range of products for some time. They have been efficient, friendly and professional, they continue to help us whenever we ask.

Posted 4 months ago

Alexander Jones had a positive experience with Hoi Yip Development Company:

I have worked with Hoi Yip Development on a numbers of products over the years. They provide a comprehensive service. Their engineers are highly capable and experienced.

Posted 5 months ago

Sharon Busch had a positive experience with Genesis TEK, LLC:

Genesis Tek came in a little higher on the bid but I went with them anyway because my initial contact was comfortable. That was huge for me, they explained everything in terms I could understand. I felt completely confident of a great outcome and they didn't let me down. I am now looking forward to marketing my product within a couple months. I plan to use Genesis Tek again for another project on the back burner. Sharon

Posted 5 months ago

Bill Schirmer had a positive experience with TruTech Engineering:

I started out with sketches and basic prints and Trutech developed solid models, verified part design and made some amazing parts for my projects. Great communication throughout the process. I would not hesitate to use their services again.

Posted 5 months ago

Alexander Jones had a positive experience with Teversham Engineering:

Teversham Engineering provide a high quality and professional service in our experience. Strong abilities on both sheet metal and machining. The finishing is always good. Also very helpful/knowledgeable during the development phase of projects. Recommended.

Posted 7 months ago

Roger Warren had a positive experience with Solid Engineering Ltd.:

Great knowledge of Solidworks, I have contracted Solid Engineering services for over 2 years, and will continue to do so in the future.

Posted 7 months ago

roger gough had a neutral experience with Coventry Engineering Group:

I understand this company is no longer trading.

Posted 7 months ago

Tom Connors had a positive experience with Accelerated Technologies:

The quality of ATI's rapid parts has always been as expected, and deliveries are never missed. If you need any RP work done, these guys are fast and very competitive.

Posted 7 months ago

Collin Kennedy had a positive experience with Z-Fab:

I would highly recommend Z-FAB. Lee is an insightful and experienced welder-fabricator. His turnaround time is second to none. Having a business partner like Z-FAB can inspire you to create new products, simply because the more you work with Lee, you realize fewer limitations on your creativity. I found that working with Z-FAB twice on three related prototype projects was not only successful, but also educational. - Collin Kennedy

Posted 8 months ago

paul grauber had a negative experience with C.A.Spalding Co.:

ca spalding located in Croyden Pa is currently under investigation for the shipment of defective fuel line brackets, reported by the Chief Inspector of 8 years. The chief inspector was brutally beaten and removed from the premises by EMT. The employee after numerous surgeries now requires an aid to walk. IN ADDITION THERE IS ALSO AN ONGOING INVESTIGATION WITH REGARDS TO CA SPALDING CROYDEN NOT ONLY SHIPPING DEFECTIVE FUEL LINE BRACKETS, BUT COMMITING OTHER MORE SERIOUS VIOLATIONS.

Posted 9 months ago

David Healings had a positive experience with Haughton Design Limited:

Haughton Design (HD) were approached with the aim of producing a plastic moulded enclosure for an electronics module. During an initial introductory meeting HD demonstrated their knowledge + skill in both the 3D design arena, along with cost effective manufacturing options for prototyping, pre-production and production. For this initial design time scales were very tight. HD met each dead-line on time, meeting our requirements and producing the required models and drawings. As a result of this initial successful design (along with 2 other subsequent designs) I have no doubt in fully recommending Haughton Design. David Healings [BEng(Hons) CEng MIET]

Posted 10 months ago

Tina Zhao had a positive experience with ASH Industries Inc.:

Primary Contact: Chris McAndrew

Posted 10 months ago

Sylvana Kotila had a positive experience with Genesis TEK, LLC:

"After becoming unsatisied with the company I was working with for being to expensive and non-productive, I interviewed numerous design firms before deciding on GenesisTek and SolidDesigns. They were gracious and never hard sell. They have good old-fashioned ethics and values, which means they work for the money. They owned the project and took a pro-active stance, thinking through problems, including potential ones, making improvements in my ideas, researching and designing with manufacturing costs in mind. They completed my project well ahead of schedule and delivered a very high quality product. It has been a pleasure working with them and I look forward to working with them again in the future."

Posted 10 months ago

RODNEY GREGORY had a positive experience with hewitts machine:

This supplier has proven to be capable to provide precise, tight tolerance, top quality components. On time delivery, at a reasonable price is very unique to this supplier. Understanding of drawing requirements is a masterful art to this supplier. Comprehension of different metals and non-metal material assists in this supplier' ability to provide a particular component, at the correct material specification.

Posted 11 months ago

John Frangella had a positive experience with Proto3000 Inc. Rapid Prototyping Services:

These guys are great. Fast and great customer service. Tom

Posted 12 months ago

Jon Richings had a positive experience with Advanta Design Group:

Whilst in the role of subcontract management for a previous employer, I had the great good fortune to work with Advanta Design. The project was lengthy, complex and very broad in scope and demanded a wide range of skills and flexibility. Advanta repeatedly exceeded my expectations in every area imaginable: problem solving, design, engineering, cost cutting. And all while being the most friendly and proactive of vendors. I eagerly await the next opportunity to work with them.

Posted about 1 year ago

About SupplierSource

Things to do

Recently Reviewed Suppliers

Featured Supplier

About SupplierSource:

Things to do:

Helpful Resources:

Popular Searches: